Ambient Light Setup - Kohler K-7421 Guide D'installation

Feature Setup (cont.)
Scroll down to [Settings].
Press the [ok] button.
Scroll down to [Yes].
Press the [ok] button.
Scroll down to [Lighting mode].
Press the [ok] button.
Select the desired option, [bowl light], [welcome light], or [night
light] to revert to the mid point settings for each feature after
each use.
NOTE: When this feature is enabled, a check mark will appear to
the right of it. An [X] will appear to the right of the feature if it is
disabled.
Select [enable].
Press the [ok] button.

Ambient Light Setup

NOTE: The Ambient Light feature arrives disabled. When this
feature is enabled, the side panel lights will illuminate in low light
conditions.
On the back of the remote control, press the menu button.
Scroll down to [Settings].
Press the [ok] button.
Scroll down to [Yes].
Press the [ok] button.
Scroll down to [Lighting].
Press the [ok] button.
Scroll down to [ambient light].
Press the [ok] button.
Scroll to the desired level, [level 1-9].
To disable the ambient light option, scroll to [light off].
Press the [ok] button.
1197250-2-B 12 Kohler Co.