Bellman & Symfon BE1420 Mode D'emploi page 63

Troubleshooting
If Try this
The transmitter LED lights The battery is nearly depleted. Replace it with an

up in yellow when I press alkaline PX28A or a lithium PX28L type battery.
the button
The transmitter LED Check that the battery is positioned correctly.

doesn't light up when I
 Replace the battery with an alkaline PX28A or a
press the button lithium PX28L type battery.
The transmitter LED lights Check the receiver batteries and connections.

up in green but the receiver
 Move the receiver closer to the transmitter to make
is not activated sure it's within radio range.
 Check that the units are set to the same radio key,
see
124
Changing the radio key.
If Try this
The receiver is activated for There is probably another Visit system installed

no apparent reason nearby that triggers your system. Change the radio
key on all units, see
Changing the radio key.
125