Battery Replacement - Farmcomp wile 200 Manuel D'opérateur

EN
Care
CLEANING THE TESTER — TEST CELL
Use a soft, clean cloth to wipe out the cell, using extreme care not to damage the grain
temperature sensor at the bottom of the test cell.
Temperature sensor
MAINTENANCE
Use a soft, clean cloth to clean device. Do not use strong detergents and do not allow
liquids inside the meter. Keep the meter in a dry place, preferably at room temperature.
If the meter is not used for a long time, remove the batteries.

BATTERY REPLACEMENT

The meter uses four AA (LR6) batteries. Replace all batteries at the same time.
14