Farmcomp wile 200 Manuel D'opérateur page 14

EN
Use
3. Ensure hopper slider is pushed in to keep grain from dropping. Fill hopper to the
rim with sample.
4. Pull slider and the grain will evenly flow into the test cell.
5. Remove hopper when prompted. Level the grain by pushing the handle in steady
motion towards the back of the unit and back removing excess grain.
6. When the handle is back to starting position, the meter will automatically start
measuring. Results will appear on the screen within seconds.
FUNCTIONS AND SETTINGS
Settings and functions can be browsed and modified at the settings menu
GRAIN OFFSET
Each grain can be individually adjusted by 10.0% in increments of 0.1% to match the
results of an elevator tester
LANGUAGE
Select preferred language
11