Publicité
Les langues disponibles
Les langues disponibles
EN
Assembly the product
Fig.2
Fig.3
Fig.4
1. Take the unit and all the other parts
out of the package, then check and
be sure all the parts are available
reference the Figure 1 show.
2. Fully extend the telescopic pole by
open the clips and loosen the poles,
then fully extend the pole, at last close
the clips on the pole and to lock the
poles. As (figure 2) shows. Make sure
that the pole is securely locked into
place and cannot be pushed down.
NOTE: The Telescopic Pole must
be fully extending during steamer
operation to insure enough height for
steam clothes.
3. Insert the bottom of the telescopic
poles into the pole base (see Figure 3),
and make sure the pole not move.
4. Fix the Iron holder on the telescopic
pole (see Figure 4), and attach the
steam nozzle on its holder like the
figure 5 shows.
Caution: Do not upside down the
nozzle like the (figure 6) show, it is very
dangerous due to the Nozzle easy fall
off.
5. Attach the connecting rod to the
poles as Figure 7 shows. To attach the
8
Publicité
