Publicité
Les langues disponibles
Les langues disponibles
Problem Solving Guide
PROBLEM
The unit fails to
steam. The light on
the On/Off Switch
does not illuminate.
The unit fails to
steam. The light on
the On/Off Switch
does illuminate.
Water drips from
nozzle
Burn the clothes
TECHNICAL DATA
220-240V 50/60Hz 2400W
This device conforms to the safety requirements and provisions
of directives 2014/35/EU on Low tension devices and
2014/30/EU on Electromagnetic Compatibility.
:
CAUSE
Steamer is not
plugged in.
Household Circuit
Breaker/Ground
Fault Interrupter is
tripped or
Fuse is blown.
Mineral buildup in
the unit.
The Water Tank is
empty.
Temperature setting
is too low.
Temperature setting
is too high.
17
SOLUTION
Plug into electrical
outlet.
Reset the Circuit
Breaker/Ground
Fault Interrupter, or
replace the fuse.
If you need
assistance, contact a
qualified electrician.
Follow the cleaning
ways Procedure in
this manual.
Refill the Water
Fill Tank using the
procedures in this
manual.
Follow the
temperature setting
procedure in this
manual re-setting
the temperature.
Follow the
temperature setting
procedure in this
manual re-setting
the temperature.
EN
Publicité
