Publicité
Les langues disponibles
Les langues disponibles
EN
Screw back the safety cap like the figure 13
shows, be sure the cap screw tighten with boiler,
otherwise there is steam leakage from there.
Plug the unit into a properly grounded three-
pronged outlet. Make sure the electric voltage is
same as the unit spec required.
Press the On/Off Switch to "On." the switch is
illuminated, pre-heating 3 minutes, the steam will
be ready. (see figure 14).
Picture12
Picture13
Picture14
CAUTION: Close the power switch or pull the
plug in time if there is no steam out. Dry
boiler will affect the service life or damage it.
Using Vertical ironing
Place garment on clothes hanger, and place the
hanger on Hanger Hook, fold the ironing board,
and start ironing garment.
CAUTION:
Before
ironing,
please
set
temperature to max once steam is ready, if
the steam is not ready, while you ironing the
12
Publicité
