X Rocker XPBT21 Mode D'emploi page 6

Wired Connection Guide: PS4 & Xbox
Controller
DUAL SHOCK 4 CONNECTION GUIDE
1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket.
2. Connect the other end of the B1 cable to the chair via the green port.
3. With the PS4 turned on, go to the main menu (or locate the main
hold the PS button on the PS4 controller until the quick menu appears on screen.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
8. Set the control panel to AUX mode by pushing the 'MODE' button.
XBOX CONTROLLER GUIDE
1. Set the control panel to AUX mode by pushing the 'MODE' button.
2. Connect the B1 cable to the bottom of the Xbox controller via the headset socket*
3. The XBox will automatically recognize the connection and pass through to the X Rocker.
*For headset and chat compatibility, you will need to place a CTIA compliant headset into
the headphone socket of the X Rocker control panel. Please check with your device
manufacturer to ensure that you have a CTIA compliant headset. If you use an OMTP compliant
headset then you may experience issues with chat and audio funct i onality.
**You may need an Xbox One headset adapter if a headset socket is not available on your
controller. These are available separately through any gaming retailer.
(Enables Chat Pass-Through Mode)
B1
AUX
menu screen). Press and
6