Publicité
Les langues disponibles
Les langues disponibles
Operation:
GB
17
43675-Weinberger-IM-V03-INT.indb 17
1.
Open the lid and place the object to
be cleaned inside the tank. Then fill
the tank with water. The water must
cover the object to be cleaned but not
exceed the maximum fill level marking.
2.
Close the lid and connect the device
to the wall socket. The blue power
LED (internal cover) lights up for 1 to 2
seconds.
3.
Set the power switch to ON position;
the blue LED indicator lamp lights up
and the device starts cleaning. The
cleaning process of the cleaning tank
will cause a buzzing sound during
cleaning.
4.
After 3 minutes the cleaning process
will stop automatically. Set the power
switch back to OFF position at any time
in order to stop the cleaning process.
5.
Switch off the device after cleaning,
open the lid and remove the cleaned
object from the device. Empty the tank.
15/9/15 19:01
Publicité
