Eaton Metalux HBE-HBLED Instructions D'installation

IB519042EN
Installation Instructions – HBE-HBLED Doorframe
Instructions d'installation – Encadrement HBE-HBLED
Instrucciones de instalación - Marco de la puerta HBE-HBLED
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Eaton assumes no responsibility for claims brought
about by improper or careless installation or handling
of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
HBE-HBLED Door Frame Installation
1. Attach the free end of each door frame tether to the
housing using the screw preset at each corner of the
fixture housing, as indicated in (Figure 1.)
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: Lamps Contains Mercury, Dispose according to
local, state, or federal laws.
NOTICE: Minimum 90° supply conductors.
N ote: Specifications and dimensions subject to change
without notice.
Figure 1.
Brand Logo
reversed out of
black
INS # INS #