(Full-Balanced Pure Digital System) - Pioneer RS-A7 Mode D'emploi

Connecting the Units
Example of 4-way system connection with 1 RS-A9 and 3 RS-A7s

(Full-balanced pure digital system)

RS-D7R
(Sold separately)
Optical cable
IP-BUS cable
Analog signal
If the RS-A7's Network mode
setting switches for CHANNEL
A and B are set identically (2ch),
connect an optical digital line to
the RS-A7's OPTICAL IN CH-
A jack.
When using the RS-A7 with
2-channel connection, be sure
the RS-A7's CHANNEL A
and B Network mode setting
switches are set identically.
Sound will not be output if
they are set differently.
Network mode setting switch
CHANNEL A·B :SW
9
RS-A9 (Sold separately)
This unit
Address: 2
Network mode setting switch
CHANNEL A·B :MID
This unit
Address: 3
Network mode setting switch
CHANNEL A·B :LOW
This unit
Address: 4
Tweeter
Mid-range
Low-range
Subwoofer