Kenmore C14302 Guide D'utilisation Et D'entretien page 10

Before You Call
Problem
SOUND AND NOISE (cont.)
Popping or cracking
sound when com-
pressor comes on.
Bubbling or gurgling
sound, like water
boiling.
vibrating or rattling
noise.
WATER/MOISTURE/FROST INSIDE FREEZER
Moisture collects
on inside of freezer
walls.
WATER/MOISTURE/FROST OUTSIDE FREEZER
Moisture collects on
outside of freezer.
ODOR IN FREEZER
Odors in freezer.
lID PROBlEMS
lid will not close
POWER AvAIlABlE lIGHT IS NOT ON
Power Available
light is not on.
All manuals and user guides at all-guides.com
Cause
• Metal parts undergo expan-
sion and contraction, as in hot
water pipes.
• Refrigerant (used to cool
freezer) is circulating
throughout the system.
• Freezer is not level. It rocks
on the floor when it is moved
slightly.
• Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.
• Freezer is touching the wall.
• Weather is hot and humid.
• Lid may not be seating prop-
erly.
• Lid is opened too often or too
long.
• Lid may not be seating prop-
erly, causing cold air from
inside freezer to meet warm
air from outside.
• Interior needs to be clean.
• Foods with strong odors are in
the freezer.
• Freezer is not level. It rocks
on the floor when it is moved
slightly.
• Floor is uneven or weak.
Freezer rocks on floor when it
is moved slightly.
• LED may be burned out.
• No electric current is reaching
the freezer.
Correction
• This is normal. Sound will level off or disappear as
freezer continues to run.
• This is normal.
• Level the unit. Refer to ""Leveling"" in the
tion Section.
• Ensure floor can adequately support freezer. Level
the freezer by putting wood or metal shims under
part of the freezer.
• Relevel the freezer or move freezer slightly. Refer to
"Leveling" in the Installation Section.
• The rate of frost buildup and internal sweating
increases. This is normal.
• See "lID PROBlEMS".
• Open lid less often.
• See "lID PROBlEMS".
• Clean interior with sponge, warm water, and baking
soda.
• Cover the food tightly.
• This condition can force the cabinet out of square
and misalign the lid. Refer to "Leveling" in the In-
stallation Section.
• Level the floor by using wood or metal shims under
the freezer or brace floor supporting the freezer.
• Contact a qualified serviceman.
• See "Freezer does not run" in the "RUNNING OF
FREEZER"Section.
10
Installa-