Fm Mode; Selecting Fm Mode; Scan Setting; Audio Setting - Tangent Danmark ALIO BAZE Mode D'emploi

FM Mode

Selecting FM Mode

1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Or it will play
the last FM station you were listening to.
3. To manually change the FM frequency, make sure no other order/system setting is going on,
turn TUNE knob to change the frequency by 0.05MHz per step.
4. To automatically scan, while FM frequency shows up, turn TUNE knob clockwise or
anticlockwise, and then press SCAN button, your radio will skip forwards or backwards until it
reached the next available station.

Scan Setting

By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press MENU
button, and then turn TUNE knob to select FM Menu, press ENTER button to confirm.
2. Turn TUNE knob to select Scan setting, and then press ENTER button to confirm.
3. Turn TUNE knob to browse 'Strong stations only', and then press ENTER button to confirm.

Audio Setting

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button, and then turn TUNE knob to select FM
Menu, press ENTER button to confirm.
2. Turn TUNE knob to select Audio setting, and then press ENTER button to confirm.
3. Turn TUNE knob to browse 'Forced mono', and then press ENTER button to confirm.

Viewing Station Information

FM stations broadcast additional information. Press INFO button repeatedly. The display will show
the information through Radio Text, Program Type, Date and Program Name.
15