Station Order; Full Scan; Manual Tune; Drc (Dynamic Range Control) Value - Tangent Danmark ALIO BAZE Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27

Station Order

You may want to display the stations in different order.
1.
Press MENU button, and then turn TUNE knob to select DAB Menu, press ENTER button to
confirm.
2.
Turn TUNE knob to select Station Order, and then press ENTER button to confirm.
3.
Turn TUNE knob to select 'Alphanumeric' or 'Ensemble', and then press ENTER button to
confirm your selecting option.
Alphanumeric
Display all stations in alphanumeric order.
Ensemble
List currently broadcasting active stations before inactive ones.

Full Scan

This feature enables your radio to scan for all available stations.
1.
Press MENU button, and then turn TUNE knob to select DAB Menu, press ENTER button to
confirm.
2.
Turn TUNE knob to select Full Scan, and then press ENTER button to confirm.

Manual Tune

1.
Press MENU button, and then turn TUNE knob to select DAB Menu, press ENTER button to
confirm.
2.
Turn TUNE knob to select Manual Tune, and then press ENTER button to confirm. The
display will show the channel number and frequency.
3.
Turn TUNE knob to step among the channels and then press ENTER button select the current
channel.
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show
a tuning meter with the signal strength and the multiplex name after a few seconds.
4.
Press MENU button to exit manual tune.

DRC (Dynamic Range Control) value

You can set the compression level of stations to eliminate the differences in dynamic range or
sound level between radio stations.
Note: set DRC to off indicates no compression; set DRC to low indicates little compression; set DRC to
high shows maximum compression.
1.
Press MENU button, and then turn TUNE knob to select DAB Menu, press ENTER button to
confirm.
2.
Turn TUNE knob to select DRC, and then press ENTER button to confirm.
3.
Turn TUNE knob to select 'DRC High', 'DRC Low' or 'DRC Off', and then press ENTER button
to confirm.
12

Publicité

Table des Matières
loading

Table des Matières