Fm Radio Operation - Tangent Danmark Dab2go+ Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
<TUNING /SELECT> control to select and press < TUNING /SELECT> control to confirm.
Preset the DAB+ stations
While listening to the DAB+ station, press and hold MENU button to go to system menu,
then select Preset Store to save the favourite station. Rotate < TUNING /SELECT> control
to choose the number and then press < TUNING /SELECT> control to store the station.
Shortcut for preset 1-5 can be set to store the favourite station by pressing and holding
number 1-5 button respectively.
Recall the preset DAB+ stations
Press and hold MENU button to go to system menu, then select Preset Recall to recall
the desired preset station. Rotate < TUNING /SELECT> control to choose the preset
number and then press < TUNING /SELECT> control to confirm.
Shortcut for preset 1-5 can be recalled by pressing its corresponding number 1-5 button
directly.
DAB+ information Display
You can view the DAB+ service information. Press INFO to view the programme
information, the programme type of the station, the frequency, signal strength, bit rate,
codec, audio type, channels, the date.
If there is a picture shown for the station, you can press < TUNING /SELECT> control to
enlarge the picture with full screen. Press it again, the display will go back to the playing
screen.

FM Radio Operation

Caution: Before listening to the radio, ensure that the DAB/FM Antenna is correctly
connected and adjusted with proper length and direction.
The icon on the top right corner of the display shows the strength of the FM signal
detected by the device.
Scanning to FM stations
Rotate < TUNING /SELECT> control to make tuning with 0.05MHz per step or
press SCAN button to go to search for next FM station.
In FM mode, there are two options for setting on the system menu.

Publicité

Table des Matières
loading

Table des Matières