Tangent Danmark Dab2go+ Mode D'emploi page 10

Rotate the < TUNING /SELECT> control to choose setting up Alarm 1 or Alarm 2. Press
the < TUNING /SELECT> control to enter the detailed settings.
Alarm Mode: Rotate the < TUNING /SELECT> control to schedule the alarm to
Off/Daily/Once/Weekend/Weekday, press the < TUNING /SELECT> control to confirm.
Alarm Time: The alarm time can be set with procedures follow the same as the clock
setting. Rotate the < TUNING /SELECT> control to set the alarm time and press the
<TUNING /SELECT> control to confirm.
Alarm Sound: Set the alarm sound (Buzzer/DAB/FM). Rotate the
<TUNING /SELECT> control to select and press the <TUNING /SELECT> control to
confirm. (When activate the alarm if the alarm sound is set to DAB in the poor reception
of station signal, it will be automatically changed to BUZZER for the alarm sound)
Note : The alarm volume is based on the volume setting when the alarm is set. If
the device is set with MUTE, the alarm is also turned off.
In order to activate the alarm if the alarm sound is set to DAB/FM, the antenna
should be extended and positioned properly to ensure good reception of station
signals.
When the alarm(s) is/are set and saved, a clock icon will appear at the bottom of the
display. The clock icon is also displayed on the screen at standby mode.
When alarm is ON, press STANDBY or ALARM button to stop the alarm or press the <
TUNING /SELECT> control to enter snooze mode.
The device alarms again in 5 minutes after entering snooze mode. The 5-minute count
down will also appear on the display.
In snooze mode, the snooze time can be changed to 5/10/15/30 by rotating the < TUNING
/SELECT> control.
To turn snooze off, simply press STANDBY button.