JBL ProSilent a100 Mode D'emploi page 14

Technical data
Voltage/ frequency
Input
Output
Head pressure
Diaphragm
Outlet
Adjustable
Aquarium
Installation (Fig. B)
1. Do not place the air pump on or above the aquarium, and select a location where it cannot fall into the water. It is safest
to hang the air pump on a dry wall near the aquarium.
2. We urgently recommend the use of the enclosed non return valve(s),
from flowing back into the device.
3. Like any other air pump,
this by placing on a rough surface that is absolutely horizontal if possible. As a precaution, secure the air pump with a
wire or cord that you thread through the hole on the bottom of the housing and attach to the wall with a hook.
4. Cut an air hose of a suitable length and connect one end with the hose screw connection on the air connection of the
air pump. Attach the other end of the air hose to the air connection of an air stone or another air-operated accessory.
Place the air stone or the air-operated article in the aquarium. Avoid an excessively long air hose, since this can de-
crease the efficiency of the air pump.
5. Connect the air pump to the power supply and use the air volume control to adjust the air volume as needed.
10
ProSilent-a100-400-Handbuch.indd 10
ProSilent a100 ProSilent a200
230 V / 50 Hz
3 W
100 l/h
>160 mbar
1
1
1
40 - 150 l
JBL ProSilent air pumps may "wander" on surfaces as a result of their own vibration. Prevent
ProSilent a300
230 V / 50 Hz 230 V / 50 Hz
3.4 W 3.9 W
200 l/h 300 l/h
>160 mbar >160 mbar
1
1
1
50-300 l 100- 400 l
JBL ProSilent Safe, in order to prevent water
ProSilent a400
230 V / 50 Hz
5.5 W
400 l/h
>180 mbar
2 2
2 2
2 2
200- 600 l
21.04.2011 15:34:54 Uhr