User's Configuration Menu - Honeywell AQ1000TN2 Guide Du Propriétaire

User's Configuration Menu

1. Press the backlight
The first parameter is displayed.
2. To modify a parameter, press either of the
3. To display the next parameter, briefly press the backlight
4. To exit the menu, press the backlight
The parameters appear in the order shown in the following table.
Parameter
Display mode
Temperature setback
Backlight
button for 3 seconds to access the configuration menu.
Default setting
Automatic
7 °F (4 °C)
Temporary
4
buttons.
button for 3 seconds.
Options
Automatic, °F, °C
0 to 16 °F (0 to 9 °C)
Temporary / Permanent
button.
69-2005EF