Télécharger Imprimer la page

Sonia Maia Micro Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

choose the operating time of the machine, in a
range of between 1 and 30 minutes.
● Set the power using the
to choose the power of the machine, in a range of
between 1 and 9.
● Use the
device.
- When running, the
- When paused or on standby, the
light up.
OPERATION
● Connect the device and leave it in standby mode
with the
indicator lit.
● Set the power to the minimum and select the
operating time.
● Hold the handpiece with your hand and press
. The operating indicator
and the device will start up.
● Place the device on the skin of the area to be
treated to start the treatment, adjusting the suction
power according to your needs.
Bear in mind:
● Clean the skin before starting the treatment.
● Make sure you have placed the cotton filter inside
the selected head beforehand.
● To switch the heads or one handpiece for another,
put the device in standby mode.
● The vacuum power should be kept under control, as
a high power could cause skin lesions.
● Test first on your own hand, and then start with the
patient once the vacuum power has been set.
● Regularly replace the cotton filter with a new one.
● The higher the number on the diamond-tipped
head, the finer the grain. Keep this in mind
according to the treatment to be performed.
● In addition to the grain, there are heads of different
sizes. Select the appropriate measurement
according to the area to be treated.
- Body, especially for knees, elbows and stretch
marks.
- Face and large spots
EN
4
or
buttons
button to start or stop the
indicator will light up.
indicator will
will light up
- Scars, fine lines and imperfections
- Eyes, nose, wrinkles, blackheads and acne.
CLEANING AND MAINTENANCE
● Before cleaning the device, unplug it from the
mains.
● Clean the device with a soft, dry cloth. Do not use
liquids to clean it.
● After each use, the various components and
accessories must be sterilised and left to dry.
● For maintenance or repairs of any part of the
product, please contact your distributor or
specialised technician.
RECYCLING
If you need to dispose of the product or any of its
parts or accessories, please check and respect the
laws and regulations applicable to waste management
and environmental protection.

Publicité

loading

Ce manuel est également adapté pour:

H3201