Publicité
Les langues disponibles
Les langues disponibles
● Insert the armrest in the correct position so that the pin
fits with the plastic part of the stretcher body and push it
in until the stop.
● Turn the armrest until it is in a more or less vertical
position and you are not allowed to continue turning.
● Pull out until the stop again and then continue turning
until the armrest rests in a horizontal position.
● Perform the same procedure on the 2 armrests.
OPERATION
● Connect the bed to an electrical outlet using the power
cord.
● Hand controller
- Adjusting height
• Use the buttons
and
adjust the stretcher height.
● Manual functions
- Adjusting backrest tilt
Accompany with
your hands
• Press lever
downwards with your foot, while tilting
1
the backrest with your hands.
• When you release lever
current position.
• Press lever
downwards again with your foot and the
1
backrest will return to its 100 position relative to the
horizontal line.
- Adjusting seat tilt
• Press lever
downwards with your foot, while
2
tilting the backrest with your hands to lean your seat
backwards.
• When you release lever
current position.
• Press lever
downwards again with your foot and the
2
seat will return to its horizontal position.
of the control knob to
Press down
, the backrest will stay in its
1
Press
down
, the seat will stay in its
2
- Adjusting footrest tilt
• Use lever
3
located under the footrest. Push it
towards the centre of the stretcher and the footrest
will tilt downwards.
• When you release lever
current position.
• To tilt the footrest up, push it up to the desired
position.
CLEANING AND MAINTENANCE
● Before cleaning the device, unplug it from the mains.
● Clean the device with a soft, dry cloth. Do not use liquids
to clean it.
● For maintenance or repairs of any part of the product,
1
please contact your distributor or specialised technician.
RECYCLING
If you need to dispose of the product or any of its parts
or accessories, please check and respect the laws
and regulations applicable to waste management and
environmental protection.
2
3
, the footrest will stay in its
3
EN
3
Publicité
