Introduction; Symbols - Uniks EV CHECK Manuel

1.Introduction

• You have acquired a high-quality test adapter manufactured, which will enable you to perform repeatable
measurements for a very long period of time.
• The adapter is designed to test function and electrical safety of charging stations mode 3 for AC charging.
• This adapter allows you to conduct tests in combination with appropriate test instruments like installation
Tester and /or Scope Meters (oscilloscope).
• With this adapter, charging stations can be tested in accordance with IEC/EN61851-1 and IEC/HD 60364-7-722.
• Read this manual carefully to ensure the safe performance and function of the test adapter.
• Ensure that the end user of this product receives this manual.

2.Symbols

CAUTION Refer to the explanation in this manual.
WARNING Hazardous Voltage, Risk electric shock.
The equipment is protected by double insulation or reinforced insulation.
Earthing (grounding) terminal.
Reference, please pay utmost attention.
Conformity symbol, confirms compliance with the applicable European directives.
The requirements of the Low Voltage Directive with the relevant regulations Standards are also fulfilled.
Symbol for marking of electrical and electronic equipment (WEEE Directive).
EV CHECK
21