Causes And Rectification Of Faults; Disposal Of The Old Device - CASO DESIGN MI 30 Ceramic Mode D'emploi

17.3 Causes and rectification of faults

The following table assists in localizing and rectifying minor faults
Error
The selected program will not
start.
Food is not sufficiently
defrosted, warmed up or
cooked after preset time has
elapsed.
The device functions but the
cooking chamber lighting
does not work.
Abnormal noises can be
heard during operation of
microwave.
The time in the display field is
not correct.
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.

18 Disposal of the Old Device

Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for their
functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they could be
detrimental to human health and the environment. Therefore, do not put your old device
into the non-recyclable waste under any circumstances.
Utilise the collection point, established in your town, to return and recycle old electric
►
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
►
Possible cause
Device door is not closed
Power plug is not plugged in
Fuse is not activated
Incorrectly selected time or
power level
Defective cooking chamber light.
Food is covered with aluminium
foil
The cookware contains metal
and sparks are being created
within the cooking chamber
Power failure
Attention
Please note
Action
Close device door
Plug in mains plug!
Activate fuse
Re-set time and power
level
Repeat process
Let Service dept repair
light.of cooking
chamber
Remove aluminium foil
Observe information
on cookware!
Re-set time
66