Care And Cleaning - Klarstein INFINITY STORM Mode D'emploi

Important Notes on Operation
• Press the Speed button repeatedly to select one of six speed levels.
• The swing angle is 85° horizontally and 15° vertically. Both functions (horizontal
and vertical) can be combined to achieve a particularly extensive mixing of the
room air. Press the OSC key several times to select the direction in the following
order: horizontal > vertical > combined > off.
• Press the timer button several times to set a timer for a maximum of 8 hours.
• Press the Mode button several times to set one of the modes: Normal, Natural or
Sleep mode. The corresponding symbol is shown in the display.

CARE AND CLEANING

• Before cleaning and assembling, fan must be unplugged.
• To ensure adequate air circulation to the motor, keep vents at the rear of the motor
free of dust.
• Please wipe the exterior parts with a soft cloth soaking a mild detergent.
• Do not use any abrasive detergent or solvents to avoid scratching the surface.
• Do not use any of the following as a cleaner: gasoline, thinner.
• Do not allow water or any other liquid into the motor housing or interior parts.
Note: Do not disassemble the fan to remove dust!
EN
17