Chauvet Professional ROGUE RH1 HYBRID Manuel De Référence page 4

Rogue™ RH1 Hybrid QRG
DMX Linking
DMX Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
The Rogue™ RH1 Hybrid will work with a DMX controller using a 3- or 5-pin
DMX serial connection.
www.chauvetprofessional.com.
The Rogue™ RH1 Hybrid uses a 3- or 5-pin DMX data connection for its DMX
personalities: 20CH and 25CH. See the User Manual for information about
connecting and configuring the product for DMX operation.
Before mounting this product, read the
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our Chauvet line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/.
Overhead Mounting
Button
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list or increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list or decreases
<DOWN>
the numeric value when in a function
A DMX Primer
Safety Notes. Use at least one mounting
Mounting Clamp
Omega Bracket
Safety Cable
Function
4
EN
is available from
Floor Mounting