Preparation; Operating Instructions - Kobalt SGY-TANK3 Mode D'emploi

PREPARATION

Before using this air tank, make sure that all parts are present. Compare
parts with package contents list. If any part is missing or is damaged, do not
attempt to use this equipment.
INSPECT TANK BEFORE EACH USE
Do not use if any parts are loose or damaged.
Inspect tank carefully for any rust, damage, or other corrosion.
Check welds on tank carefully and do not use tank if any welds are damaged
or corroded.
If any holes or leaks are present do not continue use.

OPERATING INSTRUCTIONS

Quick-connect features:
This air tank has a quick release system. To attach an air hose, pull back on the
quick-connect coupler (H) and insert the 1/4-in. male plug that is on end of the air
hose. (See Figure 1).
CAUTION: When removing the air hose from the
air tank make sure you have are holding onto the
air hose securely. The air hose will still be under
pressure.
To release the air hose or tool connected, pull back
on the 1/4-in. quick-connect coupler and the plug will
release from the quick-connect fitting (See Figure 1).
1
6
H