Asus ROG STRIX GS-AX3000 Mode D'emploi page 5

Preparing your modem Preparing your modem
1. Unplug the power cable/DSL modem. If it has a battery
backup, remove the battery.
NOTE: If you are using DSL for Internet, you will
need your username/password from your Inter-
net Service Provider (ISP) to properly configure
the router.
2. Connect your modem to the router
with the bundled network cable.
3. Power on your cable/DSL modem.
4. Check your cable/DSL modem LED lights to ensure
the connection is active.
Unplug
5