Micro-Sd Card Insertion; Connections; Connecting The Network - Eneo IPP-82A0030MHA Mode D'emploi

The camera must be installed by qualified service personnel in accordance with all local
and federal electrical and building codes.

Micro-SD Card Insertion

User can install and change Micro-SD card as shown in the following picture.
1. Open the Micro-SD card cover.
2. Install or change Micro-SD card.
3. Tightly close the Micro-SD card cover to ensure waterproofness.

Connections

Connecting the Network

Connect a standard RJ-45 cable to the network port of the camera. Generally a crossover
cable is used for directly connection to PC, while a direct cable is used for connection to
a hub.
10
Reset Button
Micro-SD Card Slot