Deltafox DG-ELM 1537 Traduction De La Notice D'utilisation Originale page 25

- have any necessary repairs
carried out on damaged parts;
- make sure that all nuts, bolts
and screws are properly tight-
ened.
Maintenance and Storage:
When servicing the blades,
remember that they can
move even if the power sour-
ce is off.
• Ensure that all nuts, bolts and
screws are tightened firmly and
the equipment is in safe wor-
king condition.
• Check the mower for any dama-
ges.
• Repair damaged parts as ap-
propriate.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specified in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
• Keep the equipment in a dry lo-
cation and out of reach of child-
ren.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass
collection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades, take
particular care to avoid fingers
being trapped between the ro-
tating blades and fixed parts of
the machine.
• Check that only replacement
tools authorised by the manuf-
acturer are used.
• Check the grass collection unit
regularly for wear or loss of
function.
• Before you shut down the ma-
chine, let the motor cool down.
• Replace worn or damaged
parts for safety reasons. Use
only original spare parts and
accessories.
• Take care with equipment that
has several cutting tools, as
the movement of one blade
may result in the rotation of the
other blades.
Electrical Safety:
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• Connect the equipment only to
a socked with a residual cur-
rent-operated protective device
(RCD) with a release current of
more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal
fences, metal posts).
• Use only authorised power ca-
bles of type H0VV-F which are
no more than 75 m long and
suitable for outdoor use. The
power cable wire cross section
must be at least 2x0,75 mm
Always completely unroll cable
drums before use. Check the
cable for damage.
• To fix on the power cable, use
GB
.
2
25