Deltafox DG-ELM 1537 Traduction De La Notice D'utilisation Originale page 24

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 49
GB
king position before returning
the equipment to the ground.
Lift it only on the side facing
away from the user.
Do not work without the grass
bag or collision guard. Keep
away from the ejection hole at
all times.
Do not start the motor while
standing in front of the dischar-
ge duct.
Caution! Danger! The blade
continues to run after swit-
ching off.
There is a risk of injury.
The equipment is not to be
lifted or transported while the
motor is running. Switch off
the equipment if it has to be
tilted in transit, when crossing
surfaces other than grass, and
when the equipment is being
transported to and from the
surfaces to be mowed.
Always keep the grass ejection
hole clean and clear. Remo-
ve cut material only when the
equipment is stopped.
Do not leave the equipment
unattended in the workplace.
Do not work with equipment
that is damaged, incomplete,
or has been modified without
the authorisation of the ma-
nufacturer. Do not use the
equipment with damaged sa-
fety devices or screens or with
missing safety equipment such
as deflection and/or grass coll-
ection devices.
Do not overload the equip-
ment. Work only within the spe-
24
cified power range and do not
change the regulator settings
on the motor. Do not use low-
powered machines for heavy
work. Do not use your equip-
ment for purposes other than
those for which it is designed.
Do not use the equipment near
inflammable liquids or gases.
Non-observance will result in a
risk of fire or explosion.
Do not lift or carry the equip-
ment when the motor is run-
ning.
Turn off the appliance, unplug
it from the mains and check
that all moving parts are at
rest:
- Whenever you leave the ma-
chine,
- before removing obstructions
or loosening blockages from
the discharge chute,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dama-
ged or frayed,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
Do not place feet or hands
near or under rotating parts.
Do not stand in front of the
grass ejection hole during sick-
le mowing.
If the lawnmower starts to vi-
brate abnormally, an immediate
check must be carried out.
- search for signs of damage;

Publicité

Table des Matières
loading

Table des Matières