Philips RQ1200 Serie Mode D'emploi page 18

English
18
6 Press the on/off button once to switch off the
shaver.
, The display lights up for a few seconds and
shows the remaining battery capacity.
7 Insert the lug of the shaving unit into the slot
in the top of the shaver (1). Then press down
the shaving unit (2) to attach it to the shaver
('click').
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the shaver, its accessories and the Jet Clean
System (specific types only).
- The best and most hygienic way to clean the
shaver is in the Jet Clean System (specific types
only). You can also rinse the shaver under the tap
or clean it with the cleaning brush supplied.
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
- Clean the shaver after every shave for optimal
shaving performance.
- You can clean the outside of the shaver with a
damp cloth.
- Regular cleaning guarantees better shaving
performance.
Cleaning the shaving unit
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.