Philips RQ1200 Serie Mode D'emploi page 13

Travel lock (RQ1280/RQ1260/RQ1250 only)
You can lock the shaver when you are going to
travel. The travel lock prevents the shaver from being
switched on by accident.
Note: The displays of the various shaver types look
different, but show the same symbol.
activating the travel lock
1
, RQ1280: The display starts to count down
from 3. At 1, the appliance beeps to indicate that
it is locked.
, The lock symbol lights up on the display. After a
few seconds it goes out.
deactivating the travel lock
1
, The motor starts running to indicate that the
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-
in charger or Jet Clean System, the travel lock is
automatically deactivated.
Blocked shaving heads
Note: The displays of the various shaver types look
different, but show the same symbol.
- If the shaving heads are blocked, the shaving unit
symbol, the tap symbol and the exclamation mark
flash. In this case, the motor cannot run because
MINUTES LEFT
the shaving heads are soiled or damaged.
- When this happens, you have to clean the shaving
unit or replace it.
Press the on/off button for 3 seconds to enter
the travel lock mode.
Press the on/off button for 3 seconds.
English
13