Tetra EasyCrystal FilterBox 300 Mode D'emploi page 5

UK
With the purchase of the Tetra
EasyCrystal
chosen high quality and comfort
from Tetra. A good choice.
In combination with a heater, the
modern system you have acquired
represents an allround technical
solution.
By its excellent mechanical, bio-
logical and chemical filtration the
®
Tetra
for crystal clear, healthy water. The
maintenance of the EasyCrystal
Filter is extremely easy: No need
to rinse out the filter media, no wet
hands!
Before you start operation of your
new filter please read the instruc-
tions. Enjoy your Tetra
®
tal FilterBox.
Tetra
FilterBox
A. Tetra
FilterBox 300
B. Tetra
Filter 250
C. Suction Cups for all other
aquarium types except for
Tetra AquaArt
D. Filter cartridge
(EasyCrystal
E. Filter foam
(EasyCrystal
BioFoam)
F. Bio Filter Balls
G. Tetra
H. Motor Housing
* is included in the purchase of a Tetra AquaArt
aquarium; otherwise available individually at your
local retailer
Handling
Installation and Operation
Unpack a filter cartridge and place
it together with the filter foam as
shown in picture 1.
Attention: The green side of the filter
cartridge has to point at the front side
4
TH50781_GA_FilterBox_300_IN_2010.indd 4
Dear customer,
®
FilterBox you have
®
EasyCrystal Filter provides
®
EasyCrys-
EasyCrystal
®
EasyCrystal
® ®
EasyCrystal
® ®
®
FilterPack)
®
Filter
®
Heater HT50*
®
of the filter. The front side of the foam
grid is marked with „Front" and should
®
point at the front side of the filter.
When using a Tetra AquaArt
um, the Tetra
is ready to slot into the side of the
aquarium (picture 2).
For all other aquarium types please
use the enclosed suction cups, at-
taching them as shown in pictures 3
and 4.
The outlet of the filter should be
®
placed above the water surface.
The distance between filter and the
gravel on the bottom of the aquarium
should at least amount to 2.5 cm (pic-
ture 5). If you have placed plants or
other objects in the aquarium the dis-
tance to the filter housing should be
at least 1.5 cm.
Now place a suitable heater into the
®
intended compartment. Attach the
enclosed clip to the heater and slide
this along the rail to the FilterBox.
(see picture 6)
We recommend using the precise
®
Tetra Heater HT50. A Tetra
is already included in the Tetra
®
AquaArt
Care and Maintenance
For crystal clear water the
filter cartridge (EasyCrystal
Pack) should be replaced every 4
weeks.
In order to change the EasyCrystal
FilterPack cartridge (D) unplug the
power plug, simply replace the car-
®
tridge and plug in the filter again.
That's it! (see pictures 7 and 8)
EasyCrystal
ment cartridges are available at
your local retailer.
If you add remedies for the fish into
the water please use an EasyCrys-
®
tal FilterPack cartridge without
activated carbon, as activated car-
bon absorbs most remedies. These
filter cartridges are available at
your local retailer.
®
Aquari-
® ®
EasyCrystal FilterBox
®
(60 l) aquarium.
®
®
FilterPack replace-
HT50
Filter-
®
02.07.10 11:30