Ricoh D2200 Mode D'emploi page 36

5. Connection
• If this machine is not going to be used for several days or longer at a time, disconnect its power
cord from the wall outlet.
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around
the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
• Do not disassemble or modify the AC adapter. Doing so may result in burns or electric shock.
Contact your service representative if the AC adapter needs repaired.
• Do not wrap the power cord or connection cable around the AC adapter. If the power cord or
connection cable is damaged or the inner wire is exposed, it may result in fire, electric shock,
or burns.
• It is recommended that you do not touch the AC adapter when using the product. Possible heat
buildup in the AC adapter may cause burns.
• Never use a power cord which appears damaged or frayed, or change the plug type on the
power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power boards.
• Do not remove the power cord when the power indicator on this machine is lit.
• Do not forcibly pull the cord of the AC adapter. Doing so can damage the power connector or the
power connector detachment prevention claw. Using the damaged power connector or damaged
power connector detachment prevention claw may result in damage to the product.
32