Ricoh D2200 Mode D'emploi page 34

4. Component Names and Functions
3. HDMI Output
Used to connect a video output device, such as a projector or monitor, to the machine through the HDMI
terminal. For details about how to connect a projector, see Operating Instructions.
4. USB port
These ports are used to connect a USB memory device to the machine to perform a firmware update, save a
page, or use other functions.
5. Ethernet interface (10/100/1000 Mbps LAN port)
This interface is used to connect the machine to a network. For details about how to connect to a network, see
Operating Instructions.
6. HDMI Input
This terminal is used to connect an image output device, such as a computer, tablet, or document camera to
display an image, and to write information on the image that is displayed. You cannot display copyright
protected content, such as data on DVDs and Blu-ray discs. For details about connecting an image output
device, see Operating Instructions.
7. DisplayPort Input
This terminal is used to connect an image output device, such as a computer, tablet, or document camera to
display an image, and to write information on the image that is displayed. You cannot display copyright
protected content, such as data on DVDs and Blu-ray discs. For details about how to connect a computer, see
Operating Instructions.
8. VGA Input
This terminal is used to connect an image output device, such as a computer, tablet, or document camera to
display an image, and to write information on the image that is displayed. For details about how to connect a
computer, see Operating Instructions.
30