Using A Vcr/Dvd Recorder To Dub Files From The Camera; Using The Camera To Dub Files From A Vcr/Dvd Player - JVC GZ-MG255U Manuel D'utilisation

Copying Files (Continued)
Using a VCR/DVD Recorder to Dub
Files from the Camera
Preparation:
•
Make sure that [ANALOG INPUT] is
set to [OFF]. (Factory-preset = [OFF]) (
•
Turn off all units.
AV Connector
DC Connector
To AC
Outlet
VCR/DVD Recorder
AV Input Connector
You can also connect the cables
using the Everio dock connectors.
or DV cable (optional) enables even higher quality
( pg. 6) When other devices such
dubbing.
as a DVD burner are connected to the Everio
dock, switch off these devices power.
1
Set the VCR/DVD recorder to its AUX
input mode.
2
Start playback on the camera.
•
To play back videos (
•
To play back playlists ("When dubbing
playlists using a VCR/DVD recorder"
pg. 35)
3
At the point you want to start dubbing,
start recording on the VCR/DVD recorder.
Refer to the VCR/DVD recorder's
instruction manual.
8 To stop dubbing
Stop recording on the VCR/DVD recorder,
then press the REC button again.
44
pg. 49)
AC Adapter
AV Cable
The S-Video
pg. 24)
NOTE
To make the fi le to record only the date
information among the display indications,
set [DISPLAY] to [OFF], [DISPLAY ON TV]
to [ON], and [DATE/TIME] to [ON] or [AUTO].
( pg. 49)
Using the Camera to Dub
Files from a VCR/DVD Player
Preparation:
•
Set [ANALOG INPUT] to [ON]. (
•
Turn off all units.
AV Connector
DC Connector
To AC
Outlet
VCR/DVD Player
AV Output Connector
You can also connect the cables
using the Everio dock connectors. The S-
Video cable (optional) enables even higher
quality dubbing. (
such as a DVD burner are connected to the
Everio dock, switch off these devices power.
1
Start playback on the VCR/DVD
player.
2
Press the REC button at the scene
where you want to start recording.
8 To stop recording
Press the REC button again.
NOTES
•
If "COPY PROTECTED CONTENT"
appears, the fi le is protected and cannot be
recorded.
pg. 49)
AC Adapter
AV Cable
pg. 6) When other devices