Electrical Safety; Safety Information For Chain Saws (En 60745 Part 2-13) - AL-KO MT 40 Notice D'utilisation Originale

GB
■
The appliance is not soiled.
■
The appliance show no
signs of damage.
■
All controls function prop-
erly.
■
Keep all appliance handles
dry and clean.
■
Do not overload the appli-
ance. It is intended for light
work in the private sector.
Overload can lead to damage
to the appliance.
■
Never operate the appliance
with worn or defective parts.
Always replace defective
parts with original spare parts
from the manufacturer. If the
appliance is operated with
worn or defective parts, guar-
antee claims against the man-
ufacturer are excluded.

3.6 Electrical safety

■
To avoid short-circuits and
destroying electrical compon-
ents:
■
Protect the appliance
against humidity and do not
use it in the rain.
■
Do not spray the appliance
with water.
■
Do not open the appliance.
32
NOTE
Heed the safety instruc-
tions for the rechargeable
battery and for the char-
ging unit in the separate
operating instructions.
3.7 Safety information for
chain saws (EN 60745
Part 2-13)
■
Keep all parts of your body
away from the saw chain
when the saw is running.
Before starting the saw,
make sure that nothing is
touching the saw chain.
When working with a chain
saw, one moment of inatten-
tion can mean your clothing or
parts of your body coming into
contact with the saw chain.
■
Always hold the chain saw
with your right hand on the
rear grip and your left hand
on the front grip. Holding the
chain saw with your hands the
other way around increases
the risk of injury and is not al-
lowed.
■
Hold the electrical tool us-
ing the insulated handle
surfaces because the saw
chain could come into con-
tact with its own mains
cable. Contact between the
saw chain and a live cable
Safety instructions
CSA 4020