Canarm PLF Serie Manuel D'opération page 6

PLF SERIES
WALL EXHAUST FAN
Figure 4
Adjusting Belt Tensioner
ACCESSORIES
Canarm provides a full line of controls from simple on/off thermostats to sophisticated multiple staging controllers and PC based controllers.
Winter covers are available for colder climates where the fan is shut down for the winter. Performance enhancing cones are available for
24" to 36" sizes that boosts air moving performance and efficiency by approximately 10% for PLF36 fans, and 15% for PLF24 fans.
Weather Hoods are available for 12" to 24" models.
canarm ltd. - corporate head office
2157 Parkedale Avenue, PO Box 367
Brockville, Ontario Canada K6V 5V6
Tel: (613) 342-5424 Fax: (613) 342-8437
www.canarm.com
m0017_Plf serIes_06_13_2022
WARNING
motors are eQuIPPed WIth automatIc overload ProtectIon and
may restart WIthout WarnIng. alWays dIsconnect PoWer before
attemPtIng to servIce, or removIng shutter.
1 Remove Bolt
Change screw hole placement. Moving
2
screw towards belt will increase tension.
3
Use screw from step 2 as pin location for
tensioner. Reassemble bolt from Step 1.
note: Remove belt before making adjustments.
Tel: (519) 848-3910. Fax: (519) 848-3948
arthur manufacturing facility
#7686 Concession 16, RR 4
Arthur, Ontario Canada. N0G 1A0
agsales@canarm.ca
Page 6 of 6