Sony WEGA KP-FW51 Mode D'emploi page 50

Using the "Memory Stick" viewer (continued)
To exit the "Slide Show"
To change still images and movies in "Slide Show" manually
To change the slide advance interval
To start the "Slide Show" from the specified still image or movie
50
Advanced Operations
Press on the remote.
1 Press MEMORY STICK to display the "Memory Stick Home".
2 Move up or down to select "Slide Show", then press
The "Slide Show" menu appears.
3 Move up or down to select "Advance", then press
4 Move up or down to select "Manual", then press
5 Move up or down to select "Start", then press
If you move right, the next still image or movie appears; if you
move left, the previous still image or movie appears.
You can select a time interval with which still images or movies
change, from among "5 sec", "10 sec", "30 sec", "1 min", "5 min"
and "10 min". The factory setting is "5 sec".
The interval can be changed when "Advance" in the "Slide Show"
menu is set to "Auto".
1 Press MEMORY STICK to display the "Memory Stick Home".
2 Move up or down to select "Slide Show", then press
The "Slide Show" menu appears.
3 Move up or down to select "Interval", then press
4 Move up or down to select the interval you want to set, then
press .
5 Move up or down to select "Start", then press
The "Slide Show" starts.
1 Press MEMORY STICK to display the "Memory Stick Home".
2 Move up or down to select the still image or movie from which
you want to start the "Slide Show", then press
The "Memory Stick Home" (index menu) appears.
3 Move up or down to select "Slide Show", then press
.
.
.
.
.
.
.
.
.