Parts List - Nuna pipa icon ECE R129/00 Mode D'emploi

1 According to the ECE R129/00 Regulation, the infant
child restraint with Base is a Universal ISOFIX Class C, D
infant child restraint and should be fitted using the ISOFIX
connections.
2 This is an "i-Size" child restraint System. It is approved to
Regulation ECE R129/00, for use in, "i-Size compatible"
vehicle seating positions as indicated by vehicle
manufacturers in the vehicle users' manual.
3 If in doubt, please consult the infant child restraint
manufacturer or the retailer.
This is an i-Size ISOFIX INFANT CHILD RESTRAINT SYSTEM.
It is approved to ECE R129/00 series of amendments for not all
vehicle manufacture's handbooks list i-Size compatibility yet.
This seat and base is also approved for use in ISOFIX compatible
vehicles. Please refer to the vehicle manufacturer's website or
consult your dealer.
It will fit vehicles with positions approved as i-Size ISOFIX
positions (as detailed in the vehicle handbook), depending on the
category of the infant child restraint and of the fixture. If in doubt,
consult either the infant child restraint manufacturer or vehicle
manufacturer.
13

Parts list

Some module may vary depending on model
1 Head Support
2 Seat Pad
3 Side Guides
4 Infant Insert
5 Adjustment Webbing
6 Adjustment Button
7 Safety Buckle
8 Shoulder Harness Straps
9 Canopy Mount
10 Canopy
11 Handle
12 Handle Button
13 Rear Guide
1
2
3
4
9
5
8
7
6
15
16
14 Stroller Release Handle
15 Cold Weather Boot
16 ISOFIX Connector
17 Shell Indicator
18 ISOFIX Guides
19 Load Leg
20 Load Leg Adjust Button A
21 Load Leg Indicator
22 Load Leg Adjust Button B
23 Infant Child Restraint
Release Button
24 Lock-off
10
11
12 14
13
24
23
17
22
18
19
21
20
14