Greenlee 746A Manuel D'utilisation page 5

IMPORTANT SAFETY INFORMATION (cont'd)
Do not secure this tool in a vise. This tool is
designed for hand-held operation.
Use this tool for the manufacturer's intended
purpose only.
Failure to observe these precautions may result in
injury or property damage.
Do not operate the pump lever after the ram stops.
Continuing to operate the pump lever after the ram
stops will damage the system.
Do not perform any service or maintenance other
than as described in this manual. Injury or damage
to the tool may result.
Failure to observe this precaution may result in injury
and property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
Greenlee Tools, Inc.
Hydraulic Knockout Drivers
5
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070