Troubleshooting; Reset - Midland Atlantic XT Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65

7. Troubleshooting

Your Atlantic XT is designed to provide you with years of optimal performance. If for some reason
problems arise, refer to this chapter before contacting a service centre in your region.

7.1 Reset

If your transceiver experiences a logical malfunction (improper symbols on the display, blocking of
functions, etc.), it may not be experiencing a true failure, but rather a problem caused by external
factors. For example, it may have an incorrect setting brought on by a noise or spikes in the
electrical system during battery recharging. In such cases, you can reset the transceiver to its
factory-programmed settings, by resetting all parameters:
1) Turn off the transceiver
2) Remove the batteries for about 60 seconds (Par.4.2)
Before you go ahead with the reset, we recommend that you take note of all the setting you
have carried out as they will be deleted.
12

Publicité

Table des Matières
loading

Table des Matières