English - Tivoli Audio PAL+BT Guide De Démarrage Rapide

PAL+BT Getting Started
1.
Extend the telescopic antenna and position for best
reception.
2.
Plug in the PAL radio using the included power
adapter and press the Power button
remote or briefly press down on the control wheel on
top of the radio.
3.
Wait for full-scan for DAB/DAB+/DMB
to complete.
4.
Press the or buttons on the remote to view
the stations list on the display, then press
again to scroll through the stations.
5.
Press the Volume or buttons on the remote to
adjust the volume.
6.
Press and hold
currently tuned station..
7.
With the PAL on, press the Alarm button
remote control to access the alarm. Use the
buttons and Menu/Select button
and set the alarms.
8.
Press and hold to enter the main menu and press
briefly to select items within the menu.
NOTE:
The PAL includes a partially charged battery for added safety
during shipping. To charge the battery, place the PAL in standby
with the adapter connected. For more detailed information,
please consult the owner's manual.
Download the latest, complete multi-language owner's manual at:
www.tivoliaudio.com/manuals
2 – ENGLISH
on the
or
to store the
on the
or
to adjust
PAL+BT remote control
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth and that your device is not connected to any other
Bluetooth product. Devices may pair differently. Below is a general guide.
1.
Change the source to Bluetooth, then press and hold the Scan button. Turn the volume up about ¼
to start. Also turn up the volume on the source device (the device you are streaming from).
2.
Turn on the Bluetooth wireless technology on your enabled device.
3.
Select "Tivoli Audio PAL+BT" when it appears on your device's screen to initiate searching. Some
devices may prompt you for a PIN. If so, enter "0000". "Tivoli Audio PAL" will change from "Not
Paired" to "Connected".
4.
Once the radio displays "BT Connected" on its screen, you are paired to the radio and can begin
playing your music wirelessly. Adjust the volume level on your device. You should not have to pair
your device again. Depending on your device, you may need to make multiple attempts at Pairing
and/or Connecting to the PAL, but please give your device adequate time to Pair or Connect
before repeating the process.
NOTE:
• If the audio drops out or stops during playback, move your device closer to the PAL, or check to be
sure another wireless device is not interfering with the signal.
• When switching from Bluetooth to DAB or FM, you may need to re-adjust (lower) the radio's volume
level.
Specifications
FM Frequency:
87.5-108.0 MHz
DAB Frequency:
174.928 - 239.200 MHz
EU Importer: Tivoli Audio, Cooperatief
Mariaplaats 3 3511 LH Utrecht The Netherlands
Model: PAL+BT™
Type:
Portable, weather resistant DAB/FM radio with Bluetooth Wireless
Technology
Driver: 1 x 2.5" treated, magnetically shielded, full range driver
Power:
9VDC nominal, 2A Battery Pack: Li-ion, 7.2V, 2850mAh
Battery Current:
2A
AC Adapter: Model: DYS818-090200W-K
Input:
100-240V - 50/60Hz, 0.5A Max
Output: 9.0V, 2.0A
Dimensions:
15.49cm H x 9.4cm W x 10.85cm D (3.7" W x 6.10" H x 4.27" D)
Weight:
1.07kg (2.35 lbs)
Type of Wireless: Bluetooth
Operating Frequency:
2402-2480MHz
RF Power:
<6 dBm (E.I.R.P.)
3 – ENGLISH