LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur page 48

B. Hydraulic adjustment : Rebound
Settings are made in the spring by simply
turning the red wheel marked "DNM".
The adjustment range is 20 clicks.
Hydraulic adjustment
Number of clicks
The factory setting is 6 clicks from the "slow" position (fully
unscrewed wheel).
C. Spring preload adjustment
Clamping nut
Warning : it is imperative to check the tension of your spring regularly. If the spring
is no longer stressed, the risk of losing parts or even breaking the mechanism is
high.
Tip : when using the LMX 64, a low spring preload will be detected by clicking
noises at the shock absorber.
D. Spring weight / stiffness table
The stiffness of the spring is generally indicated directly on it.
USER'S WEIGHT
< 60 kg
60 kg - 70 kg
70 kg - 80 kg
80 kg - 90 kg
+90 kg
SLOW
0 - 7
Factory settings : 20mm
The spring preload is done with a hook wrench
or by hand.
The spring preload must be chosen according
to its weight : the heavier the pilot, the greater
the spring preload must be to adjust the
stiffness of the suspensions.
MEDIUM FAST
7-14 14-20
STIFFNESS (in lbs inches)
450
500
550
600
650
17