Loading Capacity; Operating Conditions; Charge - P - LMX Bikes ELECTRIC FREERIDE LMX 64 Manuel Utilisateur

2. Position the stem and the handlebar at 90 ° to the front wheel then tighten
the 2 stem screws located on either side of the steering tube to lock the
stem relative to the fork. Tighten to 8 Nm.
3. Install pedals with a 15 mm open-end wrench. Make sure to put the pedal
marked L on the left and the pedal marked R on the right.
Firmly shake hands with the 15mm wrench until a tightening torque of 35
Nm max.
5.

LOADING CAPACITY

The LMX 64 frame has been designed for all-terrain use.
However, for the durability of the frame and the technical elements, the load must
remain within the following limits :
Maximum weight of the LMX ready for us : 30 kg
●
Maximum weight of the equipped cyclist : 120 kg
●
Maximum engine power (peak ) : 2.5 kW (LMX 64H)
●
Maximum speed : 45 km/h (the LMX 64T version is not allowed on
●
street in France)

OPERATING CONDITIONS

1. CHARGE
IMPORTANT :
The LMX 64 is supplied with a 4A charger without a fan.
The normal charging time is 250 minutes at 100% and 210
minutes at 80%.
When the battery is being charged, the logo is red.
When the battery is charged, the charger turns green.
The battery can be charged on or off the LMX.
Mechanical shock such as dropping the battery during
handling should be avoided.
USE THE ORIGINAL CHARGER ONLY
6