Publicité
Les langues disponibles
Les langues disponibles
Owner's manual
4.
When trimming is finished, turn off the appliance by sliding the Power switch
downwards.
5.
If the appliance was used with the comb attached, remove and clean the comb and
the whole appliance according to the instructions included in "Cleaning" section.
General:
•
Do not immerse the appliance in water.
•
Do not clean the blade under running water. Clean it only with the included brush.
•
Do not use any abrasives or chemical agents to clean this product.
•
Clean only the casing with a soft and slightly damp cloth.
•
Clean the appliance after each use. Regular cleaning guarantees better shaving
performance.
1.
Make sure the appliance is turned off and disconnected from power supply.
2.
Remove the blade by pushing it out of the appliance.
3.
Use the included brush to clean the blade and the hair chamber.
4.
To reassemble the blade, first place its lug on the lower ridge of the hair chamber and
then push it firmly onto the appliance.
5.
Clean the combs using the brush or rinse them under running water. Make sure to
wipe them dry before refitting.
Oiling indicator
on the display reminds the user to lubricate the blade. It is required to
keep the blade in good condition and provide optimal performance. When indicator appears
on the display, place 2 or 3 drops of included maintenance oil in between fixed and moving
blade.
•
Before storing the appliance, make sure it is clean, dry and disconnected from the
power supply.
•
Store the appliance in a dry, cool place, out of the reach of children.
CLEANING
OILING
STORAGE
15
EN
Publicité
