Publicité
Les langues disponibles
Les langues disponibles
14
Notes:
• Make sure the appliance is turned off before connecting it to the power supply.
• It takes about 2 hours to fully charge the appliance what provides about 2 hours of
run time.
1.
Connect one plug of the AC charger to the power supply socket.
2.
Connect the other plug to the appliance's power socket.
3.
When the appliance is charging, charging indicator
increases.
4.
When the appliance is fully charged, charging indicator goes off.
5.
Disconnect the AC charger from the appliance and power supply socket.
Notes:
•
The appliance may become warm during charging/operation. It is a normal behavior.
•
Use the included charging station to charge the appliance. To do this, first connect
one plug of AC charger into power supply socket. Then connect the other plug to
the charging socket of charging station. Finally, place the appliance into the charging
station.
EN
•
When the appliance is fully charged, remove the appliance from charging station and
disconnect the AC charger from the power supply socket.
Notes:
•
Make sure that the appliance is turned off when attaching or removing the combs.
•
The set includes four guides, each of them having different cutting lengths- 3, 6, 9 and
12 mm.
1.
Choose the desired comb.
2.
Attach the comb on the back of the blade and slide it downwards until it locks in place.
3.
Remove the comb from the blade by pushing it upwards.
1.
Slide the Power switch upwards to turn on the appliance.
Note: If you want to use the appliance with a comb attached, do it before turning on
the appliance (see "Inserting and removing combs" section).
2.
Set the cutting length switch to the desired position. Available cutting lengths are 0,8;
1,05; 1,3; 1,55 and 1,8 mm.
3.
Start cutting your hair:
• when cutting hair with a comb attached, make sure the blade stays close to the skin;
• use the appliance without comb attached for more precise trim (for example on the
temples).
CHARGING
INSERTING AND REMOVING COMBS
OPERATION
Owner's manual
is on and operating time
Publicité
