LC-POWER LC-M39-QHD-165-C Mode D'emploi page 19

4. Take out the upper styrofoam.
5. Use the base bracket assembly assembled in step 3 to align it with the
slot of the machine and buckle down (Note: Pull the quick release bu�on
up with your finger to remove the base bracket assembly)
6. Grab the bracket with your hand and put the machine upright (note: during
the process of erec�ng the machine, the machine is s�ll in the lower
Styrofoam without taking it out, do not pinch the screen directly with your
hands to prevent the screen from breaking)
Make sure the monitor is laid on a flat surface before removing the stand.
Eng-5