Installation - Electrolux EDE1070PDW Notice D'utilisation

Masquer les pouces Voir aussi pour EDE1070PDW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Programme
Cupboard Dry

15. INSTALLATION

15.1 Unpacking
CAUTION!
Before use all parts of the
transport packaging must be
removed.
1. Open loading door.
2. Pull off adhesive strips from inside
machine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
Spun at / residual humidity
1000 rpm / 60%
Synthetic 3 kg
1200 rpm / 40%
800 rpm / 50%
Drying time
87 min.
40 min.
46 min.
15.2 Vent hose
As to the outlet itself, if you
have decided on a install
wall/window grille, a good
local builder's merchant can
supply you with the
necessary fittings and
installation advice.
Make sure that the vent
hose length is less than 2 m,
and that it contains no more
than 2 bends.
WARNING!
It is important not to connect
the vent hose to, for
example, a cooker hood, or
a chimney or flue pipe
designed to transmit the
exhaust from a fuel burning
appliance.
ENGLISH
15
Energy
consump‐
tion
3,20 kWh
1,20 kWh
1,47 kWh

Publicité

Chapitres

Table des Matières
loading

Table des Matières