Denios Bio.x B 200 Mode D'emploi page 6

Bio-Reiniger
Safety instructions
This unit can only be used safely if you read this user
manual carefully and strictly follow the instructions it
contains.
The electrical system must be designed compliant to the
national regulations. For safety reasons, the device may only be
operated when a residual current protective device (RCD) is
connected upstream.
Technical data
Characteristic / Type
Dimensions
Net weight
Power consumption
Electrical connection
Pre-fusing
Work surface height
Load capacity
Maximum fill capacity
Minimum fill capacity
Level switch
Operating temperature
Pump, flow rate
Noise level
Product description
Layout and how it works
The bio.x parts cleaning unit is used to clean oil and grease
from work pieces using exclusively cleaning fluids
Bio.x C500
1010 x 785 x 1140 mm
55 kg
1,1 kW
1/N/PE 230V
10 A
950 mm
250 kg
100 l
60 l
Minimum fill level (approx. 60 l)
41°C
ca. 200 l/h
This must be checked by a qualified electrician.
The equipment must be set up on a suitable stable,
level surface.
Detergents which contain highly flammable
substances must not be used. Use only detergents
approved by DENIOS for this unit.
National regulations and safety regulations have
to be adhered to.
Bio.X C800
1600 x 1050 x 1025 mm
65 kg
1,25 kW
1/N/PE 230V
10 A
950 mm
250 kg (350 kg)
100 l
60 l
Minimum fill level (approx. 60 l)
41°C
ca. 300 l/h
< 70 dB (A)
authorised by DENIOS. All liability claims become invalid if any
other cleaning agent fluid is used.
.
1 Tank
2 Stand top
3 Ball valve
4 Control
5 Brush
6 600 µm filter screen
7 Rough filter
8 Filter
9 Lid
6 / 77
EN
Bio.X B200
890x750x1155
45 kg
0,66 kW
1/N/PE 230V
10 A
950 mm
100 kg
80l
40l
Minimum fill level (approx. 40 l)
41°C
ca. 200l/h
10 Power cable
11 Lock
12 Display
13 LED heater
14 Multi-control button
15 ON-OFF switch
16 Lamp level minimum
17 Drain tap
12/2011