Belkin F5D8633-4 Manuel De L'utilisateur page 83

Manually Configuring Network Settings
Manually Configuring Network Adapters in Windows 98SE or Me
1.
Right-click on "My Network Neighborhood" and select "Properties"
from the drop-down menu.
2.
Select "TCP/IP Settings" for your installed network adapter. You
will see the following window.
(1)
(2)
3.
If "Specify an IP address" is selected, your Router will need to be
set up for a static IP connection type. Write the address information
in the table below. You will need to enter this information into the
Router.
4.
Write the IP address and subnet mask from the "IP Address" tab
(3)
.
5.
Click the "Gateway" tab
chart.
6.
Click the "DNS Configuration" tab
the chart.
7.
If not already selected,
select "Obtain IP
address automatically"
on the IP address tab.
Click "OK".
Restart the computer. When the computer restarts, your network
adapter(s) are now configured for use with the Router.
(2)
. Write the gateway address down in the
(1)
. Write the DNS address(es) in
81 81
(3)
1
2
3
4
5
6
7
8
9
10